Oil-water separator

Oil-water separator

Operating manual

Product introduction

1. Current situation of urban catering sewage discharge

The catering industry Is developing more vigorously. Many hotels and restaurants have opened for business with large-scale operation and prosperous business. The restaurants of big cuisines in China, especially the Sichuan and Hunan cuisines, are particularly prosperous in Guangzhou in recent years. The suspended particle concentration is as high as 1500-8000mg/L, and the COD concentration is as high as 1200-2500mg/L. If these untreated pollutants are allowed to be discharged into the city's sewerage network along with sewage, it will cause a series of environmental problems.

2. Design basis

The waste water of catering industry is discharged into the urban sewer system, and the "Water Quality Standard for Wastewater Discharge into the Urban Sewer" (CJ3082 -) is implemented 1999), in which,the maximum allowable concentration of grease is 100ML /L, and the maximum concentration of COD is as high as 150ml/L (500ml/L is suitable for urban sewage system with urban sewage treatment plant). 

3.Product solutions

Oil-water separator with stainless equipment for oily wastewater treatment environment of high-tech products, the company production of oil-water separator used a number of new environmental protection technology, scientific processing and unique structure design, according to the proportion of water and oil, the oil particles after a certain time of flow and baffle plate collision after floating on the surface of the water, Catering oil-water separator multistage processing and separation device, the inclined board oil separation technology and special liquid level automatic control technology does not need any motivation and additives, can automatically mix oily wastewater in oil separation and focus on collection of discharge groove, treated wastewater reaches the national standard of urban sewage secondary.

Product use and precautions

1. Directions for use

(1) Get the product first confirm the integrity of the product and the integrity of the accessories.

(2) And then take the water test, to determine the welding without welding, water leakage phenomenon. 

(3) According to the above steps, to determine the integrity of the start of the installation and use. First, the accessories will be worn out of the oil mouth. Install and install the oil outlet valve and gasket. (Install with a layer of sealant or tape with raw material set, in order to prevent leakage phenomenon), and then fix the handle screw above the upper cover. And then in a layer of sealant or raw material belt is made at the outlet of the outlet pipe, and the outlet hose and checkpoint are installed and fixed. 

(4) After the installation of the oil and water separator, put it in the appropriate position, usually under the sink, connect the water inlet pipe, and Insert the outlet pipe into the outlet pipe. 

2.Matters needing attention

(1) The installation is simple, convenient and fast. The oil-water separator can be used as long as the water inlet is connected. 

(2) Sewage inlet must be installed slag separation network, must ensure that the entire oil and water separator at the same level, oil and water.The oil tank must be filled with water before the first use of the separator after installation. Clean the slag separator sever a I ti mes a day to ensure Smooth water f I ow and imp rove o i I i so I at ion effect

(3) Thoroughly clean the oi I and water isolation box and slag isolation net at I east once a month, clean up the sediment and sludge in the box, and clean it up. After finishing, the oil-water separator must be filled with clean water. 

Product features

(1) Made of stainless steel, beautiful and durable.

(2) Small size, high filtration rate, easy installation.

(3) No power, low operating cost, no need of agents,no secondary pollution.

(4) Fully automatic configuration, simple operation and convenient maintenance.

Product Installation Diagram

Product use

The catering oil and water separator can be widely used in restaurants,factories,schools,institutions,living communities,Mechanical maintenance,gas stations and other places to treat oily sewage.